E 250 V10-6.8L VIN S (2005)
![background image](/ford/e_250/v10-6.8l_vin_s/Page-2120005.png)
11. Release the hook-and-loop strip on the inboard cushion flap.
12. Release the J-clip.
13. Release the push pin and position aside the inboard seat cushion flap.
All seats
14. NOTE: The power seat track is shown, the manual track is similar.
Loosen the four bolts and separate the seat track and pedestal from the seat cushion to allow removal of the safety belt buckle electrical connector.