E 350 V8-6.0L DSL Turbo (2007)
Parking Brake Cable: Service and Repair
Parking Brake Cable Tension Release
1. Release the parking brake.
2. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
3. With an assistant, release the parking brake cable tension by pulling down on the intermediate cable at the cable-to-cable union until the parking
brake control sector rotates to its stop and a 4 mm (0.15 inch) x 150 mm (5.9 inch) retainer pin can be inserted.
4. Disconnect the cable at the cable-to-cable union.