E 350 V8-6.0L DSL Turbo (2007)
^
Discard the 4 crankcase breather gaskets.
^
Tighten to 7 Nm (62 inch lbs).
13. CAUTION: To prevent engine damage, do not use air-powered tools when installing the valve cover.
NOTE: Mark the position of the valve cover bolts for valve cover bolt installation.
Remove the 11 retainers and the valve cover.
^
Clean and inspect the valve cover gasket.
^
Tighten to 9 Nm (80 inch lbs).
14. To install, reverse the removal procedure.
