E 350 V8-6.0L DSL Turbo (2007)
9. Disconnect the exhaust pressure tube at the exhaust manifold.
^
Tighten to 30 Nm (22 ft. lbs).
10. Remove the nuts and the glow plug module.
^
Tighten to 8 Nm (71 inch lbs).
11. Remove the 3 nuts and the glow plug module mounting bracket.
^
Tighten to 8 Nm (71 inch lbs).
12. CAUTION: To prevent engine damage, do not use air-powered tools when installing the crankcase breather.
NOTE: Mark the position of the valve cover bolts for valve cover bolt installation.
If servicing the crankcase breather, remove the 6 bolts and the crankcase breather.
