E 350 V8-6.0L DSL Turbo (2007)
10. Remove the 4 motor mount-to-crossmember nuts.
11. Remove the upper motor mount studs.
12. Loosen the 8 motor mount-to-motor mount plate bolts for each motor mount.
13. Install the special tools.
14. Install the special tools.
15. CAUTION: Use care when raising the engine to avoid engine or body damage.
Raise the engine.
16. Remove the 8 motor mount-to-motor mount plate bolts and the motor mounts.
Installation
1. Install the motor mounts and loosely install the 8 motor mount-to-motor mount plate bolts.
2. Lower the engine.