Engine Mount Service and Repair | E 350 V8-60L DSL Turbo (2007)
3. Remove the special tools.
4. Remove the special tools.
5. Install the upper motor mount studs.
^
Tighten to 55 Nm (41 ft. lbs).
6. Tighten the 8 motor mount-to-motor mount plate bolts.
^
Tighten to 80 Nm (59 ft. lbs).
7. NOTE: The top retaining nut must be tightened first.
Install the 4 motor mount-to-crossmember nuts.
^
Tighten to 90 Nm (66 ft. lbs).
8. Tighten the exhaust pipe nuts.
^
Tighten to 47 Nm (35 ft. lbs).
