E 350 V8-6.0L DSL Turbo (2007)
10. If loosened, tighten the turbocharger inlet Y-pipe nuts at the RH to LH joint.
^
Tighten to 27 Nm (20 ft. lbs).
11. Check the systems for leaks.
12. Install the engine cover.
10. If loosened, tighten the turbocharger inlet Y-pipe nuts at the RH to LH joint.
^
Tighten to 27 Nm (20 ft. lbs).
11. Check the systems for leaks.
12. Install the engine cover.