E 350 V8-6.0L DSL Turbo (2007)
16. Remove the bolt and position the manifold absolute pressure (MAP) sensor aside.
All vehicles
17. NOTE: The condenser fittings on diesel vehicles are sealed with O-ring seals only and are not equipped with gasket seals.
Disconnect the condenser fittings.
-
Discard the O-ring seals and gasket seals (if equipped).
-
To install, tighten to 15 Nm (11 lb-ft) for 4.6L, 5.4L or 6.8L vehicles.
-
To install, tighten to 8 Nm (71 lb-in) for diesel vehicles.
18. Remove the washer reservoir filler tube.
1
Remove the screws.
2
Remove the washer reservoir filler tube.
