E 350 1 Ton Van V10-6.8L VIN S (1997)
12. Install the two new cast iron forward clutch cylinder seals in the grooves.
NOTE: Stagger the interlocking opening on the seals 180 degrees apart.
13. Install the No. 9A forward clutch thrust bearing.
NOTE:
-
Lightly lubricate the thrust bearing with petroleum jelly to hold it in place during assembly.
-
The black side of the bearing must face upward.
Forward Hub and Ring Gear
DISASSEMBLY
1. Remove the No. 8C forward clutch hub thrust washer.
2. Remove the forward hub retaining ring.
