E 350 1 Ton Van V10-6.8L VIN S (1997)
15. Coat the inside of the rear axle universal joint flange with a small amount of rear axle lubricant WSP-M2C197-A or equivalent and install the rear
axle universal joint flange on the drive pinion shaft. For Model 80, use the Companion Flange Replacer.
16. Install the washer and nut. Tighten the nut to specification.
NOTE:Whenever the rear axle universal joint flange is removed, the pinion washer and pinion nut must be replaced.
17. Perform the ring gear and pinion backlash adjustment.
