E 450 V10-6.8L (2008)
Using the special tool, compress the valve springs and remove the camshaft roller followers.
4. CAUTION: The bearing caps must be marked for installation in their original location or engine damage can occur.
Remove the bolts, the camshaft bearing caps and the camshaft from the cylinder block.
Installation
1. Lubricate the camshaft journals with clean engine oil.
2. Install the camshaft and the camshaft bearing caps in their original locations onto the cylinder head. Loosely install the 15 bolts.
3. Tighten the bolts in the sequence shown.
4. Install the special tool between the valve spring coils to protect the valve stem seal from damage.
