E 450 V10-6.8L (2008)
Lifter / Lash Adjuster: Service and Repair
Hydraulic Lash Adjuster
Removal
1. Remove the camshaft roller followers.
2. CAUTION: The hydraulic lash adjusters must be installed in their original locations. Record the hydraulic lash adjuster locations.
Failure to follow these instructions may result in engine damage.
Remove the hydraulic lash adjusters.
Installation
1. CAUTION: The hydraulic lash adjusters must be installed in their original locations. Failure to follow these instructions may result in
engine damage.
NOTE: Lubricate the hydraulic lash adjusters with clean engine oil prior to installation.
Install the hydraulic lash adjusters.
2. Install the camshaft roller followers.