E 450 V10-6.8L (2008)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Oil Level Indicator and Tube
Removal
1. Remove the engine air cleaner and the air cleaner outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
2. Remove the LH exhaust manifold.
3. Remove the nut, the bolt and the oil level indicator and tube.
^
Discard the O-ring seal.
4. Inspect the oil level indicator tube for damage.
Installation
1. NOTE: Lubricate the O-ring seal with clean engine oil prior to installation.
Using a new O-ring seal, position the oil level indicator and install the bolt.