E 450 V8-5.4L (2009)
Rear Door Exterior Handle: Service and Repair
Exterior Door Handle - Side and Rear
Exterior Door Handle - Side and Rear
Removal and Installation
All doors
1. If equipped, remove the door trim panel.
Rear door
2. Remove the 4 license plate housing screws.
3. Position the housing away from the door.
4. NOTE: The rear door exterior door handle is part of the license plate housing.
Disconnect the door lock cylinder actuating rod and the door latch cable and remove the license plate housing.
Rear door with E-Guard Cargo Protection System
5. Remove the 4 license plate housing screws.
6. Position the housing away from the door.
7. NOTE: The rear door exterior door handle is part of the license plate housing.
Disconnect the door latch cable.
8. NOTE: View of the door lock cylinder cover is from the bottom.
Release the 2 tabs on the door lock cylinder cover and slide it off the door lock cylinder.