E 450 V8-5.4L (2009)
Rear door with E-Guard Cargo Protection System
13. Remove the 4 license plate housing screws.
14. Position the housing away from the door.
15. Disconnect the door latch cable.
16. NOTE: View of the door lock cylinder cover is from the bottom.
Release the 2 tabs on the door lock cylinder cover and slide it off the door lock cylinder.
All doors
17. Remove the door latch remote control screw.
18. Remove the 3 door latch screws.
-
To install, tighten to 12 Nm (106 lb-in).
19. Remove the door latch assembly.
-
If equipped, disconnect the door lock actuator electrical connector.
20. To install, reverse the removal procedure.
-
Using the Heavy Duty Riveter, install new rivets.
Rear Door Handles, Locks and Latches - Exploded View, Double Latch
Rear Door Handles, Locks and Latches - Exploded View, Double Latch