E 450 V8-5.4L (2009)
Removal and Installation
1. Remove the seat armrest. For additional information, refer to Seat Armrest - Front See: Interior Moulding / Trim/Arm Rest/Service and
Repair/Seat Armrest - Front.
2. Release the J-clip at the lower edge of the backrest trim cover.
3. NOTICE: Use care when separating the seat backrest trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn
from the seat backrest foam pad.
Invert the backrest cover up the backrest, release all the retainers and remove.
4. To install, reverse the removal procedure.
Seat Cushion Cover - Front
Seat Cushion Cover - Front
Removal and Installation
NOTE: For parts identification and locations, refer to Seat - Exploded View, Front See: Service and Repair/Front Seats/Seat - Exploded View, Front.
1. Remove the seat cushion. For additional information, refer to Seat Cushion - Front See: Seat Cushion/Service and Repair/Removal and
Replacement/Seat Cushion - Front.
2. Release all the cushion cover fasteners from the cushion frame.
3. Separate and remove the cushion frame from the foam pad and cushion cover.
4. NOTICE: Use care when separating the cushion cover hook-and-loop strip or the hook-and-loop strip can be torn from the foam pad.
Invert and remove the cushion cover from the foam pad.
5. To install, reverse the removal procedure.