E 450 V8-5.4L (2009)
Seat Cover: Service and Repair
Rear Seats
Seat Backrest Cover - Rear, Bucket
Seat Backrest Cover - Rear, Bucket
Removal and Installation
1. Remove the RH and LH armrests from the seat. For additional information, refer to Seat Armrest - Rear, Bucket See: Interior Moulding /
Trim/Arm Rest/Service and Repair/Seat Armrest - Rear, Bucket.
2. Release the J-clip at the lower edge of the backrest cover.
3. NOTICE: Use care when separating the seat backrest cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from
the foam pad.
Invert the backrest cover and remove.
4. To install, reverse the removal procedure.
Seat Cushion Cover - Rear, Bucket
Seat Cushion Cover - Rear, Bucket
Removal
1. Remove the seat cushion. For additional information, refer to Seat Cushion - Rear, Bucket See: Seat Cushion/Service and Repair/Removal and
Replacement/Seat Cushion - Rear, Bucket.
2. Release the cushion cover J-clips.
3. NOTICE: Use care when separating the seat cushion cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the
foam pad.
Invert the cushion cover and remove.
4. To install, reverse the removal procedure.
Seat Backrest Cover - Rear, Bench
Seat Backrest Cover - Rear, Bench
Removal and Installation
NOTE: For parts identification and locations, refer to Seat - Exploded View, Rear, Bench See: Service and Repair/Rear Seats/Seat - Exploded View,
Rear, Bench.
1. NOTE: RH shown, LH similar.
If equipped, insert an appropriate tool and release the detachable safety belt anchor(s) from the seat.
