E 450 V8-5.4L (2009)
7. Disconnect the electrical connector from the parking brake switch.
8. Remove the 3 parking brake control nuts and position the parking brake control to access the front parking brake cable.
-
To install, tighten to 23 Nm (17 lb-ft).
9. Disconnect the front cable from the parking brake control.
10. Disconnect the front parking brake cable conduit from the parking brake control.
1. Using a box-end wrench, compress the fingers of the parking brake cable conduit.
2. Remove the front parking brake cable and conduit from the parking brake control.
11. To install, reverse the removal procedure.