E 450 V8-5.4L (2009)
8. NOTE: 4.6L (2V) shown, 5.4L (2V) similar.
Disconnect the LH fuel injector electrical connectors, ignition coil electrical connectors and the wire harness retainers.
9. Disconnect the wiring harness retainer and position the engine control wiring harness aside.
10. Disconnect the electrical connector.
11. Disconnect the engine wiring harness retainer and the 2 PCM electrical connectors.
12. Disconnect the transmission wiring harness retainers from the engine wiring harness and position both the engine and transmission wiring harness
aside.
13. Remove the 2 bolts and position the cooling fan shroud onto the cooling fan.
