E 450 V8-5.4L (2009)
14. Remove the 4 exhaust Y-pipe flange nuts.
-
Discard the flange nuts.
15. NOTE: RH shown, LH similar.
Remove the 4 engine support insulator-to-crossmember nuts.
16. Using a jack positioned on the RH rear of the cylinder block, raise the engine 25.4 mm (1 in).
17. Remove the engine support insulator-to-crossmember bracket nut.
18. Remove the 2 nuts and the engine support insulator-to-crossmember bracket.
19. Using the jack positioned on the RH rear of the cylinder block, lower the engine 51 mm (2 in).