E 450 V8-5.4L (2009)
2. Remove the Air Cleaner (ACL) assembly and the ACL outlet pipe.
3. Disconnect the quick connect couplings and remove the PCV tube.
4. NOTE: Rotate the PCV valve counterclockwise to remove.
Remove the PCV valve from the valve cover.
5. Remove the oil fill tube support bracket bolt.
6. Remove the clamp and the oil filler tube.
7. Disconnect the 2 generator wiring harness retainers and position the wiring harness aside.
8. Disconnect the electrical connector, remove the nut and ground strap.
9. Remove the fuel charging wiring harness from the valve cover studs and position the wiring harness and support bracket aside.
10. Remove the fluid level indicator and disconnect the attachments at the transmission fluid filler tube.
1. Remove the fluid level indicator.
2. Disconnect the rear heater hose hanger.
11. Remove the bolt, nut and position the transmission fluid filler tube aside.
