E 450 V8-5.4L (2009)
12. Remove the 2 bolts and position the cooling fan shroud onto the cooling fan.
13. Remove the 4 exhaust Y-pipe flange nuts.
-
Discard the flange nuts.
14. NOTE: RH shown, LH similar.
Remove the 4 engine support insulator-to-crossmember nuts.
15. Using a suitable jack positioned on the LH rear of the cylinder block, raise the engine 25.4 mm (1 in).
16. Remove the 3 nuts and the engine support insulator-to-crossmember bracket.
17. Using the jack positioned on the LH rear of the cylinder block, lower the engine 51 mm (2 in).