E 450 V8-5.4L (2009)
Engine Mount: Removal and Replacement
Engine Support Insulators
NOTE: 4.6L (2V) shown, 5.4L (2V) similar.
Removal
All engine support insulators
1. With the vehicle in NEUTRAL, position it on a hoist.
2. If servicing the RH engine support insulator, remove the starter motor.
3. Remove the 2 bolts and position the cooling fan shroud onto the cooling fan.
4. Remove the 4 exhaust Y-pipe flange nuts.
-
Discard the flange nuts.