E 450 V8-5.4L (2009)
5. Remove the 4 engine support insulator-to-support insulator bracket nuts.
RH engine support insulator
6. Using a suitable jack positioned on the RH rear of the cylinder block, raise the engine 25.4 mm (1 in).
7. Remove the engine support insulator-to-crossmember bracket nut.
8. Remove the 2 nuts and the engine support insulator-to-crossmember bracket.
9. Remove the engine support insulator being serviced from the vehicle.
-
For 5.4L engine, Remove the 3 engine support insulator-to-cylinder block bolts.
-
For 4.6L engine, remove the 2 engine support insulator-to-cylinder block bolts and nut.
LH engine support insulator
10. Using a suitable jack positioned on the LH rear of the cylinder block, raise the engine 25.4 mm (1 in).
11. Remove the 3 nuts and the engine support insulator-to-crossmember bracket.