E 450 V8-5.4L (2009)
6. Using a suitable jack positioned on the LH rear of the cylinder block, lower the engine.
All engine support insulators
7. Install the new 4 exhaust Y-pipe flange nuts.
-
Tighten to 40 Nm (30 lb-ft).
8. Install the 4 engine support insulator-to-support insulator bracket nuts.
-
Tighten to 90 Nm (66 lb-ft).
9. If servicing the RH engine support insulator, install the starter motor.
10. Position the cooling fan shroud and install the 2 bolts.
-
Tighten to 6 Nm (53 lb-in).