E 450 V8-5.4L (2009)
4.6L (2V) engines
12. Position the transmission cooler tube support bracket and the starter wiring harness support bracket and install the nut.
-
Tighten to 10 Nm (89 lb-in).
5.4L (2V) engines
13. Position the transmission fluid cooler tubes and support bracket and install the nut.
-
Tighten to 28 Nm (21 lb-ft).
All engines
14. Install the 2 upper transmission-to-engine bolts.
-
Tighten to 60 Nm (44 lb-ft).
15. NOTE: Lubricate the new O-ring seals with clean engine coolant prior to installation.
Install the heater outlet tube.
4.6L (2V) engine
16. Connect the coolant hose to the heater outlet tube and install the heater outlet tube stud.
