E 450 V8-5.4L (2009)
2. Using a suitable suction device, remove the power steering fluid from the fluid reservoir.
6.0L diesel vehicles
3. Remove the pushpin retainers and the upper air deflector.
4. Remove the 2 power steering fluid reservoir bracket-to-cowl bolts.
-
To install, tighten to 14 Nm (124 lb-in).
5. Remove the 2 power steering fluid reservoir bracket-to-radiator support bolts.
-
To install, tighten to 9 Nm (80 lb-in).
6. Position the power steering fluid reservoir and reservoir bracket aside.
7. Disconnect the coolant hoses from the air cleaner outlet tube.
8. NOTE: Air cleaner side shown, other side similar.
Loosen the 2 clamps and remove the air cleaner outlet tube.
All vehicles