E 450 V8-5.4L (2009)
Transmission Position Switch/Sensor: Adjustments
4R70E/4R75E
Transmission Range (TR) Sensor Adjustment
NOTICE: Do not pry on the swivel tube to disconnect the transmission shift linkage.
NOTE: Manual control lever must be in the NEUTRAL position.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the selector lever cable from the manual control lever.
3. Disconnect the Transmission Range (TR) sensor electrical connector.
4. Remove the manual control lever.
1. Remove the manual control lever nut.
2. Remove the manual control lever.
5. Loosen, but do not remove, the TR sensor bolts.
