E 450 V8-5.4L (2009)
12. Remove the park pawl components.
1. Remove the park pawl return spring.
2. Remove the park pawl.
3. Remove the park pawl shaft.
13. Inspect the output shaft and park gear for damage.
1. Inspect the park gear for damage.
2. Inspect the OSS gear for damage.
14. If damage to either the OSS or park gears is found, remove the park gear and output shaft as an assembly.
15. NOTE: The park gear and OSS gear may be present on the output shaft.
Remove the park and OSS gear from the output shaft.
16. Inspect the Teflon(R) seals in the rear of the case. If the seals are worn or damaged, install new scarf cut seals.
