E 450 V8-6.0L DSL Turbo VIN P (2004)
5. CAUTION: In the event of a catastrophic engine failure, always install a new oil cooler cover assembly (with oil cooler). Foreign material cannot
be removed from the oil cooler.
NOTE: The oil cooler is replaced as an assembly.
Remove the bolts and the oil cooler assembly.
^
Clean and inspect the gasket. Install a new gasket if necessary.
^
Clean and inspect the sealing surfaces.
6. Remove the oil pump inlet strainer.
^
Clean and inspect the strainer for tears or other signs of damage.
Installation
1. Install the oil pump inlet strainer.
2. Install the gasket in the oil cooler assembly cover.