E 450 V8-6.0L DSL Turbo VIN P (2004)
Oil Cooler: Service and Repair
Oil Cooler
Material
Removal
1. Remove the intake manifold.
2. Remove the bolts and oil filter adapter.
^
Clean and inspect the gasket. Install a new gasket if necessary.
^
Clean and inspect the sealing surfaces.
3. Remove the bolts and the exhaust gas recirculation (EGR) cooler supply port cover.
^
Clean and inspect the gasket. Install a new gasket if necessary.
^
Clean and inspect the sealing surfaces.
4. Remove the bolts and the oil filter base.
^
Clean and inspect the gasket. Install a new gasket if necessary.
^
Clean and inspect the sealing surfaces.