Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
3. Tighten the bolts in three stages, in the sequence shown.
^
Stage 1: Tighten to 2 Nm (18 inch lbs.).
^
Stage 2: Tighten to 20 Nm (15 ft. lbs.).
^
Stage 3: Tighten an additional 90 degrees.
4. Lower the vehicle.
5. Lower the engine and remove the special tools.
6. Raise the vehicle.
7. NOTE: RH is shown; LH is similar.
Install the nuts retaining the front engine support insulators to the front engine support brackets.