Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
3. Install the manual control lever shaft.
1
Install the manual control lever shaft.
2
Install the inner manual control lever shaft nut.
3
Install the manual lever shaft retaining pin.
4. Install the manual valve detent lever spring.
1
Position the manual valve detent lever spring.
2
Install the manual valve detent lever spring bolt.
5. Install the digital TR sensor.
1
Install the digital TR sensor.
2
Loosely install the bolts.
6. NOTE: Manual shift lever must be in the neutral position.
Using the special tool, align the digital TR sensor.