Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
Axle Shaft: Service and Repair
Ford - 9.75 Inch Ring Gear
Axle Shaft
Removal
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the differential housing cover.
^
Drain the lubricant.
4. Remove the rear brake drums.
5. Remove the differential pinion shaft.
1
Remove and discard the differential pinion shaft lock bolt.
2
Remove the differential pinion shaft.
6. CAUTION: Do not damage the rubber O-rings in the U-washer grooves.
Remove the U-washers.
1
Push the axle shafts inboard.
2
Remove the U-washers.
7. CAUTION: Do not damage the wheel bearing oil seal.
Remove the two axle shafts.
Installation