Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
1. Lubricate the lip of the wheel bearing oil seal. Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
2. CAUTION: Do not damage the wheel bearing oil seal.
Install the two axle shafts.
3. CAUTION: Do not damage the rubber O-rings in the U-washer grooves.
Install the U-washers.
1
Position the two U-washer on the button ends of the axle shafts.
2
Pull the axle shafts outward.
4. NOTE: If a new pinion shaft lock bolt is unavailable coat the threads with Threadlock and Sealer EOAZ-19554-AA or equivalent meeting Ford
specification WSK-M2G351-A5 prior to installation.
Install the differential pinion shaft.
^
Align the hole in the differential pinion shaft with the case lock bolt hole.
