Econoline E150 1/2 Ton V8-5.4L CNG VIN M (1998)
Muffler: Service and Repair
Muffler Inlet Pipe
REMOVAL
1. Raise the vehicle.
2. Support the exhaust system.
3. Disconnect the heated oxygen sensor electrical connectors.
4. Remove the LH and RH nuts.
5. Remove the exhaust hanger insulators.
NOTE: The exhaust hanger insulators can be reused if they show no signs of damage.
6. Remove the three nuts and the exhaust hanger insulator bracket.
7. Remove the exhaust inlet pine and casket.
INSTALLATION