Econoline E250 3/4 Ton V8-4.6L SOHC VIN W (2000)
1
Remove the manual valve detent lever.
2
Remove the parking lever actuating rod.
12. CAUTION: Use care not to damage the manual control lever shaft bore. New seal may leak.
Remove the manual control lever shaft seal.
Installation
1. Use (A) Shift Lever Seal Replacer to install the (B) manual control lever seal.
2. Install the parking lever actuating rod.
1
Install the parking lever actuating rod.
2
Install the manual valve detent lever.
3. Install the manual control lever shaft.