Econoline E250 3/4 Ton V8-4.6L SOHC VIN W (2000)
![background image](/ford/econoline_e250_3/4_ton/v8-4.6l_sohc_vin_w/Page-1643003.png)
Remove the driveshaft from the U-joint tool, and install the snap ring.
3. Repeat Steps 1 and 2 to install the opposite side of the driveshaft yoke.
4. Inspect the driveshaft slip-yoke. Install a new yoke, if necessary.
5. Repeat Steps 1 and 2 to install the remaining new bearing cups, spider, driveshaft slip-yoke, and the snap rings.
6. Note: Do not strike the bearings.
Check the U-joints for freedom of movement.
-
If binding, strike the yoke with a brass or plastic hammer.
7. Install the driveshaft.