Econoline E350 1 Ton V10-6.8L VIN S (1998)
2. Loosely install the cover fasteners.
3. Tighten the fasteners in two stages following the sequence shown.
-
Stage 1: Tighten fasteners 1 through 5 to 20-30 Nm (15-22 ft. lbs.)
-
Stage 2: Tighten fasteners 6 through 15 to 40-55 Nm (30-41 ft. lbs.)
4. Tighten the bolts in the sequence shown.
-
Stage 1: Tighten to 20 Nm (15 ft. lbs.)
-
Stage 2: Tighten an additional 60 degrees
NOTE: Be sure to tighten the bolts in two stages.
