Econoline E350 1 Ton V10-6.8L VIN S (1998)
5. Connect the CKP sensor electrical connector.
6. Install the bolts.
7. Lower the vehicle.
8. Install the water pump.
9. Connect the CMP electrical connector.
10. Raise and support the vehicle.
11. Install a new crankshaft front seal and the crankshaft pulley.
12. Lower the vehicle.
13. Install the valve covers.
14. Install the radiator and fill the cooling system.
15. Install the engine Air Cleaner (ACL) and the air cleaner outlet tube.
16. Connect the battery ground cable.
17. Fill the engine with oil.
-
Use engine oil meeting Ford specification WSS-M2C153-G.