Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
13. Position the inner crankshaft sprocket with the long hub facing outward.
14. Install the LH timing chain/belt onto the crankshaft sprocket, aligning the one copper link on the timing chain/belt with the slot on the crankshaft
sprocket.
15. Position the LH timing chain/belt on the camshaft sprocket with the two copper chain links and the camshaft sprocket timing mark aligned.
NOTE:
-
Make sure the upper half of the timing chain/belt is below the tensioner guide dowel. If necessary, use the Camshaft Positioning Tool to adjust.
-
If necessary, adjust the camshaft sprocket slightly to obtain timing mark alignment.