Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
16. Position the outer camshaft sprocket and the RH timing chain/belt with the long hub of the sprocket facing inward.
CAUTION: The camshaft sprocket can jump if the Camshaft Holding Tool is not secured.
NOTE
-
Be sure the copper chain link and crankshaft sprocket timing mark are aligned.
-
The lower half of the timing chain/belt must be positioned above the dowel.
17. Position the RH timing chair/belt on the camshaft sprocket. Make sure the two copper-colored links align with the camshaft sprocket timing mark.
NOTE: If necessary, adjust the camshaft sprocket slightly to obtain timing mark alignment with the camshaft Positioning Tool.
18. As a post-check, verify proper alignment of all timing marks.