Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
2. Install the A/C manifold and tube.
1. Lubricate the new A/C manifold O-rings with Motorcraft YN-12c refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B
and install the O-rings on the A/C compressor.
2. Install the A/C manifold and tube.
3. Apply Pipe Sealant with Teflon(R) D8AZ-19554-A or equivalent meeting Ford specification WSK-M2G350-A2 to the threads of the A/C
manifold retaining bolt and install the bolt.
4. Slide the A/C compressor to the rear.
CAUTION: Support the A/C compressor while removing the A/C manifold and tube to prevent injury or A/C compressor damage.
3. Install the bolts.
4. Connect the A/C clutch electrical connector.
5. Connect the crankshaft position sensor connector.
6. Lower the vehicle.
