Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
7. Connect the compressor discharge line.
1. Lubricate the new O-rings with Motorcraft YN-12c refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B and install the
O-rings.
2. Connect the compressor discharge line.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
8. Connect the compressor suction line.
1. Lubricate the new O-rings with Motorcraft YN-12c refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B and install the
O-rings.
2. Connect the compressor suction line.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
9. Connect the A/C pressure cut-off switch electrical connector.
10. Install the fan shroud.
11. Install the drive belt.
12. Fill the engine cooling system.
13. Reconnect the battery ground cable.
14. Using proper procedures, evacuate and charge the A/C system. See: Service and Repair/Evacuation and Charging
