Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
8. Install the four clamps.
1. Install the clamp.
2. Install the screw.
9. Install the condenser to evaporator tube.
Auxiliary A/C-Heater System
REMOVAL
1. Using proper procedures, recover the refrigerant.
2. Disconnect the battery ground cable.
3. Partially drain the engine cooling system.
4. Remove the engine air cleaner (ACL) and the air cleaner outlet tube.
5. Disconnect the condenser core refrigerant lines.
1. Disconnect the compressor discharge line.
2. Disconnect the condenser to evaporator tube.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
6. Disconnect the A/C evaporator core fitting.
1. Remove the screw.
2. Disconnect the A/C evaporator core fitting.
