ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Auxiliary A/C and Heater System|Page 5989 > < Auxiliary A/C and Heater System|Page 5987
Page 1
background image

Receiver Dryer: Service and Repair
Standard A/C

REMOVAL

1. Using proper procedures, recover the refrigerant.
2. Remove the battery.

3. Remove the battery tray.

1. Remove the screws.
2. Remove the battery tray.

4. Disconnect the evaporator discharge line.

CAUTION:  Use a wrench on each side of the fitting to prevent damage to the A/C fitting.

5. Disconnect the compressor suction line.

1. Remove the screw.
2. Disconnect the compressor suction line.

CAUTION:  Use a wrench on each side of the fitting to prevent damage to the A/C fitting.

Auxiliary A/C and Heater System|Page 5989 > < Auxiliary A/C and Heater System|Page 5987