ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Auxiliary A/C and Heater System|Page 5990 > < Auxiliary A/C and Heater System|Page 5988
Page 2
background image

6. Disconnect the A/C cycling switch electrical connector.

7. Remove the suction accumulator/drier.

1. Remove the screws.
2. Remove the suction accumulator/drier.

8. Remove the A/C cycling switch.

INSTALLATION

1. Service the replacement suction accumulator/drier with the correct amount of Motorcraft YN-12c refrigerant oil or equivalent meeting Ford

specification WSH-M1C231-B.

2. Install the A/C cycling switch.

-

Lubricate the new O-rings with Motorcraft YN-12c refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B.

Auxiliary A/C and Heater System|Page 5990 > < Auxiliary A/C and Heater System|Page 5988