Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
a restricted injector as shown in Figure 4. If all the injectors are within specification, proceed to Step 3.
Step 3: (Select Toolbox Icon, then Powertrain, then Ignition System Test)
Run Ignition System Test on WDS to determine if there is an ignition problem. Look at both duration (DUR) and kilovolts (KV) and look for values that
standout from the rest as shown in Figure 5 and Figure 6.
NOTE
LIVE DISPLAY HAS TO AVERAGE IGNITION VALUES BECAUSE THERE IS TOO MUCH DATA TO DISPLAY. MAKE A CAPTURE TO
VIEW EACH ENGINE EVENT WITHOUT AVERAGING. THIS CAN BE HELPFUL WHEN THE PROBLEM IS INTERMITTENT. IF THE
