Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
Special Tools
REMOVAL
1. Remove the axle shaft.
2. Use the Impact Slide Hammer and the Axle Wheel Bearing Puller to remove the rear wheel bearing and inner wheel bearing oil seal.
NOTE: If the inner wheel bearing oil seal is leaking, the axle housing vent may be plugged.
INSTALLATION
1. Lubricate the new rear wheel bearing.
-
Use Motorcraft Synthetic Rear Axle Lubricant F1TZ-19580-B or equivalent meeting Ford specification WSL-M2C192-A.
2. Use the Axle Wheel Bearing Replacer with the Driver Handle to install the rear wheel bearing.
3. Lubricate the lip of the new inner wheel bearing oil seal.
-
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
