Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
3. Press the fluid filter and seat assembly into the pump bore until seated.
NOTE: Prior to installation,lightly lubricate seal with clean MERCON(R) V Automatic Transmission Fluid XT-5-QM or MERCON(R) V
equivalent.
4. Position the (A) gasket onto the cleaned fluid pan. Make sure the (B) magnet is positioned over the dimple in the fluid pan.
NOTE: Apply a light coat of petroleum jelly to hold the gasket to the fluid pan.
5. Install the (A) pan with the gasket. Alternately tighten the 20 (B) bolts.
6. Install the digital Transmission Range (TR) sensor.
1. Install the digital TR sensor.
2. Loosely install the bolts.
